Ingeniería de Superficies

¡Sección en Construcción!

Profesores

Estudiantes

Egresados

 

Productividad LGAC

Año

Autor profesor

Autor estudiante

Título

Publicado en

DOI (o ISSN)

2015

Gilberto Gómez Rosas

Eduardo Castañeda Paredes

Laser Shock Processing with Different Conditions of Treatment on Duplex Stainless Steel

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

http://dx.doi.org/10.1007/s11665-015-1494-1

2016

Eduardo Rodríguez de Anda,
Omar Jiménez Alemán,
Gilberto Gómez Rosas,
Martin Flores Martínez

Jose de Jesús Ibarra Montalvo,
Jorge Manuel Chavez Aguilar

Effect of laser shock processing on erosive resistance of 6061-T6 aluminum

Transactions of Nonferrous Metals Society of China

http://dx.doi.org/10.1016/S1003-6326(16)64258-9

2016

Gilberto Gómez Rosas

 

Characterization of mechanical shock waves in aluminum 6061-T6 using a high power laser pulse

Proc. SPIE 9973, Infrared Remote Sensing and Instrumentation XXIV

https://doi.org/10.1117/12.2236970

2016

Martín Flores Martínez

Alex Guillén Bonilla

A Novel Gas Sensor Based on MgSb2O6 Nanorods to Indicate Variations in Carbon Monoxide and Propane Concentrations

Sensonrs

http://dx.doi.org/10.3390/s16020177

2016

Martín Flores Martínez,
Carlos E. Canto Escamilla (POSD)

Ramona Beatriz Alemón Galindo

IBA analysis and corrosion resistance of TiAlPtN/TiAlN/TiAl multilayer films deposited over a CoCrMo using magnetron sputtering

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms

http://dx.doi.org/10.1016/j.nimb.2015.09.053

2016

Omar Jiménez Alemán

 

Sintering kinetics of Ni2FeSb powder alloys produced by mechanical milling

Transactions of Nonferrous Metals Society of China

https://doi.org/10.1016/S1003-6326(16)64326-1

2016

Omar Jiménez Alemán

 

Synthesis and Tribological Performance of Carbon, Nanostructures forme don AISI 316 Stanless Stell Subtrates

Tribology Letters

https://doi.org/10.1007/s11249-016-0769-5

2016

Omar Jiménez Alemán,
Martín Flores Martínez

Cesar Daniel Rivera Tello

Mechanical properties and tribological behavior at micro and macro-scale of WC/WCN/W hierarchical multilayer coatings

Tribology International

http://dx.doi.org/10.1016/j.triboint.2016.04.017

2017

Eduardo Rodríguez de Anda

 

Micro-Scale Abrasive Wear Testing of CrN Duplex PVD Coating on Pre-Nitrided Tool Steel

Materials Research

http://dx.doi.org/10.1590/1980-5373-mr-2016-0757

2017

Eduardo Rodríguez de Anda,
Omar Jiménez Alemán

José de Jesús Ibarra Montalvo

Study of the erosive wear behaviour of cryogenically and tempered WC-CoCr coating deposited by HVOF

Wear

http://dx.doi.org/10.1016/j.wear.2016.12.061

2017

Eduardo Rodríguez de Anda,
Omar Jiménez Alemán,
Martin Flores Martínez

Jóse de Jesús Ibarra Montalvo

Heat Treated Twin Wire Arc Spray AISI 420 Coatings Under Dry and Wet

Metals and Materials International

https://doi.org/10.1007/s12540-017-6398-1

2017

Gilberto Gómez Rosas

Cesar Augusto Vázquez Jiménez

Effect of laser shock processing on fatigue life of 2205 duplex stainless steel notched specimens

Optics & Laser Technology

http://dx.doi.org/10.1016/j.optlastec.2017.07.020

2017

Gilberto Gómez Rosas

 

Fatigue behavior of superferritic stainless steel laser shock treated without protective coating

Optics & Laser Technology

http://dx.doi.org/10.1016/j.optlastec.2017.03.003

2017

Gilberto Gómez Rosas

 

Influence of laser peening on fatigue crack initiation of notched aluminum plates

STRUCTURAL ENGINEERING AND MECHANICS

http://dx.doi.org/10.12989/sem.2017.62.6.739

2017

Martín Flores Martínez

 

Kinetic Study of the Growth of Hard Layers on a Low Carbon Steel

MRS Advances

https://doi.org/10.1557/adv.2017.517

2017

Martín Flores Martínez

 

Synthesis and characterisation of β-TCP/bioglass/zirconia scaffolds

Advances in Applied Ceramics

http://dx.doi.org/10.1080/17436753.2017.1356043

2017

Martín Flores Martínez,
Carlos E. Canto Escamilla (POSD)

Ramona Beatriz Alemón Galindo

Adhesive and tribocorrosive behavior of TiAlPtN/TiAlN/TiAl multilayers sputtered coatings over CoCrMo

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms

http://dx.doi.org/10.1016/j.nimb.2017.02.054

2017

Omar Jiménez Alemán

 

Investigation of the effect of inert inclusions on densification during solid-state sintering of metal matrix composites

Science and Engineering of Composite Materials

https://doi.org/10.1515/secm-2014-0188

2017

Omar Jiménez Alemán

Jorge Manuel Chavez Aguilar

Processing and properties of Titanium alloy based materials with tailored porosity and composition

EPJ Web Conf.

https://doi.org/10.1051/epjconf/201714013007

2017

Omar Jiménez Alemán,
Eduardo Rodríguez de Anda,
Martin Flores Martínez

Jorge Manuel Chavez Aguilar

Sintering behaviour and mechanical characterisation of Ti64/xTiN composites and bilayer components

Powder Metallurgy

http://dx.doi.org/10.1080/00325899.2017.1280585

2017

Omar Jiménez Alemán,
Martin Flores Martínez

 

Constrained sintering and wear properties of Cu−WC composite coatings

Transactions of Nonferrous Metals Society of China

https://doi.org/10.1016/S1003-6326(17)60247-4

2017

Omar Jiménez Alemán,
Eduardo Rodríguez de Anda,
Martin Flores Martínez

Jorge Manuel Chavez Aguilar

A Pilot Genome-Wide Association Study in Postmenopausal Mexican-Mestizo Women Implicates the RMND1/CCDC170 Locus Is Associated with Bone Mineral Density

INTERNATIONAL JOURNAL OF GENOMICS

https://doi.org/10.1080/00325899.2017.1280585

2017

Omar Jiménez Alemán,
Martín Flores Martínez

Iván Gerardo Farias Velázquez

Analyzing the compressive behavior of porous Ti6Al4V by X-ray microtomography

Material Research
IBERO-AMERICAN JOURNAL OF MATERIALS

http://dx.doi.org/10.1590/1980-5373-mr-2017-0510

2018

Gilberto Gómez Rosas

Cesar Augusto Vázquez Jiménez

Influence of specimen thickness on the fatigue behavior of notched steel plates subjected to laser shock peening

Optics & Laser Technology

http://dx.doi.org/10.1016/j.optlastec.2017.12.011

2018

Martín Flores Martínez

 

Síntesis y caracterización electroquímica de recubrimientos de multicapas metal cerámico de W/WN, Ti/TiN y WTiN

Revista Mexicana de Física

http://dx.doi.org/10.31349/RevMexFis.64.368

2018

Martín Flores Martínez, Eduardo Rodríguez de Anda

 

Tribological performance of ternary TiMN films  (M=AL, B, and Cr) deposited by cathodic arc on M2 steel

MRS Advances

http://dx.doi.org/10.1557/adv.2018.605

2018

Martín Flores Martínez, Eduardo Rodríguez de Anda

 

Tribological, Tribocorrosion and Wear Mechanism Studies of TaZrN Coatings Deposited by Magnetron Sputtering on TiAlV Alloy

Coatings

http://dx.doi.org/10.3390/coatings8090295

2018

Omar Jiménez Alemán

 

Analysis of Compression and Permeability Behavior of Porous Ti6Al4V by Computed Microtomography

Metals and Materials International

https://doi.org/10.1007/s12540-018-00223-w

2018

Omar Jiménez Alemán

 

Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert

Modern Mechanical Engineering

https://doi.org/10.4236/mme.2018.83014

2018

Omar Jiménez Alemán

Cecilio Jesús Martínez Gonzalez

Microstructure and Properties Characterization of WC-Co-Cr Thermal Spray Coatings

Journal of Minerals and Materials Characterization and Engineering

https://doi.org/10.4236/jmmce.2018.64034

2018

Omar Jiménez Alemán

 

Processing and properties of highly porous Ti6Al4V mimicking  human bones

Journal of Materials Research

https://doi.org/10.1557/jmr.2018.35

2018

Omar Jiménez Alemán

 

Sintering study of Ti6Al4V powders with different particle sizes and their  mechanical properties

International Journal of Minerals, Metallurgy, and Materials

https://doi.org/10.1007/s12613-018-1693-5

2019

Eduardo Rodríguez de Anda,
Omar Jiménez Alemán

Karla Guadalupe Portilla Zea,
Gabriel Israel Vásquez Hernandez

Effect of SiC microfibers as a self-healing agent and their influence on oxidation and adhesion resistance of thermal barrier coatings exposed to cyclic thermal oxidation treatments

Surface & Coatings Technology

http://dx.doi.org/10.1016/j.surfcoat.2019.05.006

2019

Eduardo Rodríguez de Anda,
Omar Jiménez Alemán,
Martín Flores Martínez

Jose de Jesús Ibarra Montalvo

Erosion roman problem in. took. steel using cold box core-making process

China Foundry

http://dx.doi.org/10.1007/s41230-019-8156-0

2019

Gilberto Gómez Rosas

 

Fatigue Life Improvement in Lean Duplex Stainless Steel by Peening Treatments

Metallurgical and Materials Transactions A-Physical Metallurgy And Materials Science

http://dx.doi.org/10.1007/s11661-019-05455-y

2019

Martín Flores Martínez

 

Tribological study of a mono and multilayer coating of TaZrN/TaZr produced by magnetron sputtering on AISI-316L stainless steel

Tribology International

http://dx.doi.org/10.1016/j.triboint.2018.10.034

2019

Omar Jiménez Alemán

 

Biochemical and molecular analysis of MPS III in 6 Mexican patients

Molecular Genetics And Metabolism

https://doi.org/10.1016/j.ymgme.2018.12.132

2019

Omar Jiménez Alemán

 

Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications

Materials Research-Ibero-American Journal Of Materials

https://doi.org/10.1590/1980-5373-mr-2018-0391

2019

Omar Jiménez Alemán,
Martín Flores Martínez

Iván Gerardo Farias Velázquez

Wear modes in open porosity titanium matrix composites with TiC addition processed by spark plasma sintering

Transactions Of Nonferrous Metals Society Of China

https://doi.org/10.1016/S1003-6326(19)65072-7

2020

Omar Jiménez Alemán

 

Synthesis and characterisation of Ti6Al4V/xTa alloy processed by solid state sintering

Powder Metallurgy

https://doi.org/10.1080/00325899.2020.1719689